MSDS

Material Safety Data Sheet
Date: November 3, 1998

Manufacturer / Supplier:

SUN POLYMERS, International, INC.
100 Sun Polymers Drive
Mooresville, IN 46158

Emergency telephone number:

(317) 834-6410

All Sparkle Resin Types

General Description

Chemical Description	Saturated Polyester Resin
Non Volatile	Minimum 99.5%
Form	Pale-yellow granules
Odor	Odorless

Technical Data

% Solid	100
Specific gravity	1.2 + .1
Melting point	80 - 104° C
Boiling point	N/A
Solubility in H₂O	N/A
Solubility in others	Toluene and Dimethylformimide
% volatile by volume	N/A
Evaporation rate	N/A
Vapor pressure	N/A
Vapor density	N/A
Decomposition products	Normal such as CO, CO₂

Transport Data

DOT classification	Not regulated
IATA / ICAO classification	Not regulated
UN number	Not regulated
TSCA status	Listed in TSCA inventory

Storage and Handling

Storage conditions	Cool, dry with good ventilation
Personal protection	Ori-nasal mask, goggles, gloves
General practice	Dust levels maintained at lowest possible levels
Waste disposal	Dispose in accordance with local and state regulations. This is not a hazardous waste.

Toxicology

Sparkle resins are likely to be substances of low toxicity. Further health hazard information is being obtained. Care should be taken to avoid breathing dust.

Exposure limit

10mg/m³ (8 hr.. TWA) total dust

Ecology

This product is not a hazardous waste. Treat as conventional solid waste.

Fire and Explosion Hazard

Flash point	> 400° C (Cleveland open cup)
Explosive power	N/A
Auto-ignition	Not available
Hazardous combustion product	CO, CO₂
Extinguish	Water, ABC dry chemical, foam or CO₂
Procedure	Self-contained breathing apparatus should be worn.

Reactivity Data

Stability	Stable
Incompatibility	None
Hazardous polymerization	Will not occur

This polymer is considered as having been notified in EINECS according to article 8 of the EEG-Directive /9/831, as this polymer is based on monomers which were marketed before 8/18/81.

The information in this MSDS was obtained from sources which we believe are reliable. However, the information is provided without any representation or warranty, expressed or implied, regarding its accuracy of completeness.